HALLOWEEN DEAL /// SAVE 75 EUR NOW WITH CODE: GHOST HALLOWEEN DEAL IS LIVE /// SAVE 75 EUR WITH CODE: GHOST DEAL HUB FIND DEALS & DISCOUNTS IN THE DEAL HUB!
ROCKET GAMES / UPDATE HUB

LATEST
AT ROCKET.

All deals and events are also available with any of our partner codes. Please support your creator.

HOLO3D MOTION.
News TECHNOLOGY

HOLO3D MOTION.

Two designs bring the effect to life: Misaki with beautiful cherry blossom effects, and Haptic, where logos and lettering disappear at certain viewing angles as you move the controller. You'll soon be able to pre-order Holo Motion!

LEARN MORE
Our new website is finally live!
NEWS Website & configurator

Our new website is finally live!

A heartfelt thank you to our loyal customers who have brought Rocket Games this far. We're very proud of our own configurator, and it's now yours to explore. Have fun!

CUSTOMISE
Rocket Games AG

ROCKET GUIDE / DUALSENSE EDGE

TMR EDGE MODULE.
READY IN MINUTES.

Install your Rocket Games TMR stick module safely in a DualSense Edge wireless controller, then check function, centre and movement range.

START INSTALLATION TMR EDGE MODULE
  • COMPATIBILITYDualSense Edge
  • TOOLSNot required
  • FINISHTesting & calibration
TMR Edge stick module for DualSense Edge shown in technical cutaway
TMR / CUTAWAY VIEWROCKET TMR EDGE MODULE

01 / INSTALLATION

EIGHT STEPS.
FULL CONTROL.

The modular DualSense Edge system allows replacement without opening the controller housing. Still work calmly and without force.

BEFORE YOU START
TURN THE CONTROLLER OFF COMPLETELY

All Rocket Games stick modules are carefully inspected and tested before shipping. Disconnect the USB cable, use a clean work surface, and do not touch or misalign sensitive contacts. Never force components into place.

  1. Step01
    QUALITY / CHECKED

    QUALITY CONTROL

    All Rocket Games stick modules are carefully inspected and tested for proper function before shipping.

  2. Step02
    PREP / CONTACTS

    PROTECT SENSITIVE CONTACTS

    Turn the controller off completely and disconnect the USB cable. Stick module connectors are very sensitive. Do not touch contacts; avoid excessive pressure or misalignment when inserting.

  3. Step03
    INSTALL / LOCK

    INSERT MODULES CORRECTLY

    Unlock and remove the DualSense Edge front cover. Open the locking lever, align both stick modules correctly and slide them fully and cleanly into their slots. Secure them with the locking lever and replace the cover.

  4. Step04
    VERIFY / SEAT

    CHECK SECURE FIT

    After locking, press both stick modules firmly down again with your thumb so they sit fully and securely in the slots.

  5. Step05
    INITIALISE / 10 SEC

    WAIT AT LEAST 10 SECONDS

    After locking the modules, wait at least 10 seconds so the controller’s power supply and initialisation can complete.

  6. Step06
    TEST / USB

    CONNECT VIA USB & TEST

    First connect the DualSense Edge with a USB cable, ideally to a PC. Open hardwaretester.com/gamepad and check all inputs and both stick axes in real time.

  7. Step07
    RECOVERY / WHITE LED

    RESET IF THE LED IS WHITE

    If the controller does not connect and the status LED remains white, disconnect and reconnect the USB cable. Then press the small rear reset button for a few seconds using a paperclip or similarly thin object. Reconnect via USB and repeat the function test.

  8. Step08
    FINAL / RECHECK

    RECHECK MODULES

    If the controller still malfunctions, press both modules down again with your thumb. Alternatively, remove them and gently blow contacts and slots with dry, low-pressure air. Do not use liquid. Reinsert and lock correctly, disconnect and reconnect USB, then check detection again.

FINAL CHECK / READY TO PLAY

INSERT.
CHECK. PLAY.

A stick module that is not fully inserted or correctly locked may malfunction or go undetected. If the issue remains after reinsertion, USB connection and reset, contact Rocket Games customer service.

GO TO CALIBRATION SERVICE PORTAL
02 / TMR EDGE SUPPORT

QUESTIONS ABOUT
MODULE REPLACEMENT.

Direct answers about compatibility, installation, calibration and safe settings for the TMR stick module for DualSense Edge.

Which controller is the TMR Edge module compatible with?

The module is designed for the Sony DualSense Edge wireless controller with replaceable stick modules, not the standard DualSense controller.

Do I need tools for installation?

No. DualSense Edge is designed for tool-free stick module replacement. Do not use screwdrivers or prying tools on the cover or modules.

Must the controller be off before replacing the module?

Yes. Turn it off completely and disconnect all cables before removing the cover or stick module.

What if the TMR module does not fit easily?

Do not force it. Remove the module, check orientation, slot and locking lever, then reinsert it straight.

Why wait 10 seconds after locking?

This gives the controller time to complete power supply and initialisation of the inserted modules before USB connection and testing.

What does a continuously white status LED mean?

If there is no connection and the LED stays white, reconnect the USB cable and reset with the small rear reset button. Then test via USB again.

Must the TMR Edge module be calibrated after installation?

Check centre and movement range first. Calibration is needed only for reproducible measurement deviations or if required by the supplied product information.

Why does a tester show a small deviation?

Very small centre values can result from mechanical tolerances and measurement resolution, and do not automatically mean in-game stick drift. What matters is whether input occurs without touching the stick.

Where can I get installation help?

If the module is not detected, does not fit securely or shows unusual values after testing, use the Rocket Games service portal and have your order number and controller model ready.